Preview

Modern Science and Innovations

Advanced search

THE EVALUATION OF TECHNOLOGICAL PROPERTIES OF POLYMER-BASED COMPOSITIONS FOR MONOLITHIC INDUSTRIAL FLOORS

Abstract

The article analyzes the factors influencing the fluidity of polymer-cement compositions that are used as industrial buildings flooring. Experimental data on assessment the necessary properties of typical self-leveling compounds for monolithic floors are carried out.

About the Author

Oxana Alexandrovna Larsen
National Research University Moscow State University of Civil Engineering
Russian Federation


References

1. Collepardia M., Trolia R., Bressanb M., Liberatoreb F., Sforzab G. Crack-free concrete for outside industrial floors in the absence of wet curing and contraction joints // Cement and Concrete Composites. 2008. Vol. 30, No. 10, pp. 887-891.

2. Beeldensa A., Montenyb J., Vinckec E., De Belied N., Van Gemerta D., Taerweb L., Verstraetec W. Resistance to biogenic sulphuric acid corrosion of polymer-modified mortars // Cement and Concrete Composites. 2001. Vol. 23, No. 1, pp. 47-56.

3. Ohama Y. Polymer-based admixtures // Cement and Concrete Composites. 1998.Vol. 20, No. 2-3, pp. 189-212.

4. Neffgen. B. Epoxy resins in the building industry - 25 years of experience // International Journal of Cement Composites and Lightweight Concrete. 1985. Vol. 7, No. 4, pp. 253-260.

5. Козлов В.В. Обеспечение монолитности строительных конструкций клеевыми композициями. Диссертация на соискание ученой степени доктора наук. Москва. 1990. 404 с.

6. D. Jeongyun, S. Yangseob. Performance of polymer-modified self-leveling mortars with high polymer-cement ratio for floor finishing // Cement and Concrete Research. 2003. Vol. 33, No. 10, pp. 1497-1505.

7. Стреленя Л. С. К оценке растекаемости строительных растворов // Строительные материалы. 2001. № 9. С. 34-36.


Review

For citations:


Larsen O.A. THE EVALUATION OF TECHNOLOGICAL PROPERTIES OF POLYMER-BASED COMPOSITIONS FOR MONOLITHIC INDUSTRIAL FLOORS. Modern Science and Innovations. 2016;(2):140-144. (In Russ.)

Views: 43


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2307-910X (Print)