Preview

Modern Science and Innovations

Advanced search

THE INNOVATIVE COMPOSITE MATERIALS IN CONSTRUCTION

Abstract

The article describes the desirability of the composites based on polypropylene and natural fillers, for use as building materials. The results of the study of the mechanical properties of composites.

About the Authors

Galina Mikhailovna Danilova-Volkovskaya
North-Caucasus Federal University
Russian Federation


Valery Yurievna Shimlovskaya
North-Caucasus Federal University
Russian Federation


Nikodim Nikolaevych Volkovskiy
Rostov State University of Civil Engineering
Russian Federation


References

1. Данилова-Волковская Г. М. Композиционные материалы на основе полипропилена (монография). Ростовская-на-Дону государственная академия сельскохозяйственного машиностроения, 2007.

2. Analysis of compositions and properties of technological additives on basis of calcium carbonate (Article)/ Danilova-Volkovskaya, G. M., Gurvich Yu.V. / Plasticheskie Massy: Sintez Svojstva Pererabotka Primenenie / Issue 2, 2001. - P. 41-42.

3. Данилова-Волковская Г. М., Аминева Е. Х. Математические методы прогнозирования физических свойств полимерных композиционных материалов (монография)// Научное издание, Ростов-на-Дону, РИЦ РГСУ 2009. - 80 c.

4. Methodology of calculating the rheological and relaxation indices of polymer material melts according to data on capillary viscosimetry (Article)/ Danilova-Volkovskaya G. M., Torner R. V. / Plasticheskie Massy: Sintez Svojstva Pererabotka Primenenie/ Issue 5, 2002. - P. 36-37.

5. Investigation of properties of polypropylene modified with elastomers (Article) / Danilova-Volkovskaya G. M. / Plasticheskie Massy: Sintez Svojstva Pererabotka Primenenie/Issue 5, 2005. - P. 31-35.

6. Маркусова В. А. Дпк - экологичные инновации. Древесно-полимерные композиты: состав и свойства. ВИНИТИ, Москва, 2011. http://rpp.nashaucheba.ru/docs/index-16888.html.


Review

For citations:


Danilova-Volkovskaya G.M., Shimlovskaya V.Yu., Volkovskiy N.N. THE INNOVATIVE COMPOSITE MATERIALS IN CONSTRUCTION. Modern Science and Innovations. 2015;(4):70-75. (In Russ.)

Views: 47


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2307-910X (Print)